Unpacking The Unit; Requirements On The Installation Location; Prior To First Use; Basic Cleaning - Graef SKS 700 Instructions D'utilisation

Unpacking the unit

When unpacking the unit, proceed as follows:
1. Remove the unit from the box.
2. Remove the packaging parts.
CAUTION!
Danger of injury!
The very sharp blade can cause injuries.
3. Remove any stickers on the unit (do not remove the type plate).

Requirements on the installation location

For safe and fault free operation of the unit, the following requirements of the
installation location have to be met:
- The unit has to be placed on a solid, flat, horizontal, and non-slipping
surface with a sufficient weight-carrying capacity.
- Make sure that the unit cannot topple over.
- Choose the location in such a way that children cannot reach the blade
of the unit or the supply lines.
- Never use the appliance outdoors, and always keep it in a dry place.
- The unit is not designed for installation in a wall or a built-in cupboard.
- Do not set up the unit in a hot, wet or moist environment.
- The socket has to be easily accessible so that the power cable can be
removed easily in case of emergency.
- - Should the connection line be too long, you can simply carriage it into
the cable compartment integrated in the housing.

Prior to first use

CAUTION!
Danger of injury!
The very sharp blade can cause injuries.
• Proceed with caution when wiping the blade.

Basic cleaning

Prior to first use, the blade of the unit must be wiped off using a moist cloth in
38