Greasing The Unit On The Inside; Screwing On The Blade Cover Plate; Ensure Value Preservation Of The Blade - Graef SKS 700 Instructions D'utilisation

14. Clean the inside of the unit using a damp cloth.
15. Clean the carriage ring and insert it back again.
16. Insert the scrape back again.
17. Insert the blade back again in reverse order.

Greasing the unit on the inside

Regular greasing will increase the service life of your unit. For this purpose,
exclusively use Graef petroleum jelly which is matched to our units. You can
obtain them in our online shop at www.graef.de under item No. 141852.
Regularly grease the unit:
• In case of frequent use, every two to three days.
• When the unit runs for 10 minutes every day, every fortnight.
When greasing the blade, proceed with utmost care as follows:
1. Remove the blade.
2. Grease the gearwheel with petroleum jelly.
3. Grease the blade bolt with petroleum jelly.
4. Also grease the blade screw with petroleum jelly.
5. Grease the carriage ring using petroleum jelly.
6. Place the blade back in again.

Screwing on the blade cover plate

• Place the blade cover plate back in again by means of the blade remov-
al device.
• To fasten, turn the blade cover plate anti-clockwise.
CAUTION!
Before starting the machine again, ensure that the blade cover plate has been
screwed on correctly.
Switch on the machine only when the blade cover plate has been mounted.
Without the blade cover plate the blade has not been fastened. The blade can
come loose and damage the device as well as cause severe injuries.

Ensure value preservation of the blade

For long-lasting sharpness and value retention of your Graef blade, werec-
ommend to clean it in regular intervals, especially after cutting up salted meat
DE
EN
FR
NL
IT
ES
DK
NO
SE
PL
HU
UKR
43