Purpose Of The Manual/Field Of Application - Interested Parties - Arneg Panama 2 Manuel D'installation

If abnormal condensation forms, inform the refrigeration technician
immediately.
Carry out all preventive maintenance operations punctually.
DO NOT use the unit barefoot
DO NOT touch the unit with wet or damp hands or feet
DO NOT remove protective covers or panelling that require the use of tools to
remove them therefore DO NOT remove the electrical panel cover. These
operations must always be carried out by specialised technicians.
DO NOT obstruct the air intake openings.
DO NOT walk on top of the unit. Danger: falls and serious injury.
DO NOT use your feet to climb onto the front of the unit for any reason. If
necessary, use an appropriate and suitable ladder in order to reach the
loading points (Rif. 15). Danger: falls and serious injury.
DO NOT use spotlights with incandescent bulbs aimed directly at the unit.
Danger: overheating the merchandise.
Exposed merchandise should not be in direct sunlight. Danger: alteration of
merchandise.
Limit the temperature of radiating surfaces located in the sales point, e.g.
insulating ceilings.
IN THE CASE OF A GAS LEAK OR FIRE:
Do not stay in the room where the cabinet is located if it is not
appropriately ventilated. Disconnect the unit by means of the general
switch upstream of the appliance.
DO NOT USE WATER TO PUT OUT THE FLAMES, USE ONLY DRY
EXTINGUISHERS.
ANY OTHER USE NOT EXPLICITLY INDICATED IN THIS MANUAL IS TO BE
CONSIDERED DANGEROUS. THE MANUFACTURER SHALL NOT BE HELD
RESPONSIBLE FOR ANY DAMAGES THAT MAY OCCUR FROM IMPROPER,
ERRONEOUS, OR UNREASONABLE USE.
USEFUL TELEPHONE NUMBERS:
SWITCHBOARD +39 0499699333 - FAX +39 9699444 - CALL CENTRE 848 800225

3. Purpose of the Manual/Field of Application - Interested Parties

This instruction manual contains a description of the Panama 2 H125-150 line of
refrigeration units, manufactured by ARNEG Spa.
The following information provides instructions with regard to:
using the cabinet
technical specifications
installation and assembly
operator information
maintenance operations
safety information
The manual should be considered part of the unit and must be kept for its entire
working life.
The manufacturer is relieved from all liability in the following situations:
improper use
incorrect installation - not completed in accordance with the regulations specified
power supply faults
serious lack of maintenance
unauthorised alterations and operations
use of non-original spare parts
partial or complete lack of compliance with the instructions.
This manual must be the responsibility of an assigned person, stored in an appropriate
location, known to all assigned workers and maintenance employees, so that it can be
consulted whenever needed.
05060133 00 23/07/2012
Panama 2 H125-150
English
27