Ecolab EcoUp Serie Manuel D'utilisation page 175

N/A = not relevant for the flow rate option
DIP switch position with the control unit is replaced
Before replacing the control unit on site, set the appropriate flow rate by using the
DIP switches. For more about the flow rate, see the pump's nameplate.
nameplates' on page 28 .
Flow rate
5l/h
11l/h
30l/h
N/A = not relevant for the flow rate option
If multiple switches are enabled, the highest switch setting counts.
Switch
PCB 1
On
10240134
Off
Off
67
Maintenance
2 3 4
N/A
Off Off
On
N/A
Off
On
N/A
Off
MAN049656 Ver. 4-03.2025
Ä 'Pump ID –
5 6
N/A N/A
N/A N/A
N/A N/A