Ecolab EcoUp Serie Manuel D'utilisation page 166

Operation
Chemical hazards (metering medium/active substance)
WARNING!
Burns caused by harmful chemicals
Leaks on the pump can allow corrosive chemicals to escape and cause
serious injury.
– Read the enclosed safety data sheet carefully before using chemicals.
– The safety regulations and the required protective clothing for working
with chemicals must be complied with.
– Safety devices such as showers and eye flushing must be accessible
and checked regularly to ensure that they are fully functional.
– Ensure adequate ventilation and extraction.
– Avoid skin and eye contact.
– Check the pump regularly for tightness.
– Do not put the pump into operation if leaks occur.
– If leaks are identified, trigger the emergency stop function
immediately.
– Do not operate the pump again until the leaks have been repaired.
DANGER!
Spilled chemicals can pose a biological hazard.
Be careful not to spill chemicals or allow them to leak; otherwise, a
biological hazard cannot be ruled out. Make sure that suitable binding
agents are provided at the filling point according to the safety data sheet
for the metering chemicals.
DANGER!
Risk of injury to the skin and eyes caused by the chemical used
(metering medium).
– Read the enclosed safety data sheet carefully before using the
metering medium.
– The safety regulations and the required protective clothing when
working with chemicals must be complied with.
– Attention must be paid to the information included on the product
data sheet for the metering medium used.
DANGER!
Hands must be washed before breaks and at the end of the working day.
Information about the usual precautions when handling chemicals and
about the use of PPE can be found on the relevant safety data sheet for
the chemical being used and must be complied with.
MAN049656 Ver. 4-03.2025 58