Installing The Profile Cylinder - Assa Abloy OneSystem 519N Notice De Montage

Fig. 13 :
Install a door fitting
Typical installation of a
profile cylinder
Fig. 14 :
Install a profile cylinder
Installation

Installing the profile cylinder

The lock must be installed in the door before the profile cylinder can be installed ("Adjusting the closing
direction of the latch", page 57, "Accessories", page 70). The profile cylinder must match the door
leaf thickness and the door fitting and protrude at least 3 mm from the door fitting when the door is
complete.
Install the profile cylinder as described in the accompany instructions. The following installation steps are typical:
1 Place profile cylinder in the profile cylinder cut-out (Fig. 14).
2 Fix it in place with the cylinder fixing screw.
3 Test the key for ease of movement.
 You have installed the profile cylinder and can operate the lock with a key.
2.
2.
1.
2.
2.
6.
3.
4.
5.
4.
4.
1
1.
EN
61