with electric
motor drive
Fail-unlocked
Pic. 1:
Electric strike
351M80
EN
24
Product information
Electric strike 351M80
General
The electric strike 351M80 is equipped with an electric drive and serves to single
action doors and swing doors. It is suitable for horizontal (in the door frame) or
vertical installation in the door frame and in the door leaf.
The door contact and the armature contact are designed as potential-free
switching contacts. The door contact is switched magnetically when the door is
closed. The armature contact can be used to monitor locking status.
The electric strike 351M80 operates according to the fail-unlocked operating
principle and is suitable for escape doors. If the power is shut off or the power
fails, the bolt can be pushed back.
Functions
The bolt is extended by motor. The activation is simple: If electric current is
introduced while the door is closed, the bolt extends after a time delay of
approximately one second. If the power is shut off, the bolt is released.
The electric strike 351M80 offers
∙ break-in resistance up to 5000 N,
∙ use for DIN left and DIN right,
∙ a door contact (reed contact) and an armature
contact (relay contact) are integrated in The
electric strike 351M80,
∙ noise reduction and
∙ installation compatibility with model 351U80.
Supplied accessories
∙ Four spacers for mounting.
Product information