Assa Abloy OneSystem 519N Notice De Montage page 58

Fig. 9 :
Adjust the closing
direction
of the latch lock 807-10
to the control latch
Fig. 10 :
Adjusting the latch
range of latch lock
807-10
EN
58
Optional: Rotating latch lock 807-10
8 Turn the optional latch lock 807-10 so that the closing direction of the latch lock corresponds to the
closing direction of the control latch (Fig. 9).
1.
2,5 mm
Optional: Adjusting the latch range on latch lock 807-10
9 Adjust the latch bolt range on the optional latch lock 807-10 (Fig. 10).
T8
< Ø3
2.
180°
3.
Installation