Installing The Profile Cylinder - Assa Abloy OneSystem 319N Notice De Montage

Fig. 15 :
Install a door fitting
Typical installation of a
profile cylinder
Fig. 16 :
Install a profile cylinder
EN
54

Installing the profile cylinder

The lock must be installed in the door before the profile cylinder can be installed ("Installing the multi-
point lock 319N", page 47, "Accessories", page 60). The profile cylinder must match the door leaf
thickness and the door fitting and protrude at least 3 mm from the door fitting when the door is
complete.
Install the profile cylinder as described in the accompany instructions. The following installation steps are
typical:
1 Place profile cylinder in the profile cylinder cut-out (Fig. 16).
2 Fix it in place with the cylinder fixing screw.
3 Test the key for ease of movement.
 You have installed the profile cylinder and can operate the lock with a key.
2
2
1
2
2.
6
3
4
5
4
4
1
1.
Installation