Assa Abloy OneSystem 319N Notice De Montage page 50

Fig. 9 :
Adjust the closing
direction of the
latch lock 807-10 to the
control latch
Fig. 10 :
Adjusting the latch range
of latch lock 807-10
EN
50
Optional: Turn latch lock 807-10
8 Turn the optional latch lock 807-10 so that the closing direction of the latch lock corresponds to the
closing direction of the control latch (Fig. 9).
1.
2,5 mm
Optional: Adjust the latch range on latch lock 807-10
9 Adjust the latch range on the optional latch lock 807-10 (Fig. 10).
T8
< Ø3
2.
180°
3.
Installation