Fimar CAM300 Emploi Et Entretien page 39

Fig. 11
3. Replace the electric resistances (fig. 11) the sealing bar teflon (fig. 11), the bell-lid rubber gaskets (2,
fig. 10) every 200 working hours.
1
Fig. 12
4. Replace the sealing diaphragm every 500/600 working hours (1 fig. 12).
5. Replace the counter-bar silicone (1, fig. 10).
6. Check the pump blades, the filters, the pneumatic solenoid valves every 2000 working hours.