Fimar CAM300 Emploi Et Entretien page 26

CHAPTER 2
How to consult and use the "Instructions Handbook"
Care of the instruction handbook
This document is an integral part of the machine. Preserve a copy of this instructions handbook for the
entire working life of the machine even if transferred or sold to third parties. Requests for further copies of
this document must be made by means of purchase order addressed to the manufacturing company.
To maintain the instructions handbook in good condition:
- use the instructions handbook taking care not to damage its contents. In particular, do not leave the
instructions handbook around during use and remember to return it to its proper place immediately after
consultation;
- do not remove, rip out or rewrite parts of the instructions handbook. Any changes required must be
referred to and subsequently supplied by the manufacturing company.
- keep the instructions handbook in a safe place, away from damp, heat and other environmental
elements which could damage it.
Symbols applied to the machine
The following safety precaution plates are applied to the machine:
DO NOT REMOVE OR DAMAGE THESE PLATES.
Definitions
The following definitions are used according to the
"Machine Directive" CEE 89/392 and subsequent issues:
Operator: person or persons assigned to machine
-
operation, adjustment, routine maintenance or cleaning.
User: body or person responsible for and/or owner
-
of the machine.
Machine manufacturer identification data and positioning of the "CE MARKING"
plate.
Identification of the manufacturing company as producer of the machine takes place in accordance with the
legislation in force by means of the following documents:
- Declaration of conformity;
- CE marking;
- Instructions Handbook.
A special plate (fig. 1), applied to the machine is marked permanently with the following data concerning CE
MARKING:
Do not remove the CE MARKING plate and/or replace it with a different one.
Should the CE MARKING plate be accidentally damaged, detached from the
machine or the manufacturer's seal removed, the customer must compulsorily
and immediately inform the manufacturing company.
fig. 1