Yamaha EDL13000SDE Manuel D'utilisation page 18

SAFE OPERATION
10
CARE OF DANGER AND WARNING LABELS
CARE OF DANGER, WARNING AND CAUTION LABELS
1. Keep danger and warning labels clean and free from obstructing material.
1. Keep danger, warning and caution labels clean and free from obstructing material.
2. Clean danger and warning labels with soap and water, dry with a soft cloth.
2. Clean danger, warning and caution labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing danger and warning labels with new labels from your local
3. Replace damaged or missing danger, warning and caution labels with new labels from
YAMAHA
YAMAHA Dealer.
your local KUBOTA Dealer.
4. If a component with danger and warning label(s) affi xed is replaced with new part, make
4. If a component with danger, warning and caution label(s) affixed is replaced with new
sure new label(s) is (are) attached in the same location(s) as the replaced component.
part, make sure new label(s) is (are) attached in the same location(s) as the replaced
5. Mount new danger and warning labels by applying on a clean dry surface and pressing any
component.
bubbles to outside edge.
5. Mount new danger, warning and caution labels by applying on a clean dry surface and
pressing any bubbles to outside edge.