Table des Matières
Publicité
How to Assemble the
Allegro
Tower of Power
®
Prior to assembly, check the parts and components received
against the following list. If you are missing any parts, contact the
Balanced Body customer service department at 1-800-PILATES
(1-800-745-2837) in the U.S. and Canada, or +1-916-388-2838
(international).
If you have purchased an Allegro 14" leg set, we strongly
recommend installing the legs before installing the Tower. See
separate instructions.
Remove all ropes and risers from the Allegro. If your Allegro
was purchased before February 1, 2004, remove the labels and
backing on the sides. You can order a new log/label free of
charge by calling 1-800-PILATES (1-800-745-2837 in the U.S.
and Canada, or +1-916-388-2838 (international).
14
™
PARTS LIST
Description
600-000
1
Tower
1
Push-through bar (PTB)
GEN9892
2
T-pin
950-129
1
T-slot bracket kit (R)
950-130
1
T-slot bracket kit (L)
600-009
4
Knob spacer
600-011
4
Delrin washer
6
Black knobs
950-131
2
Adjustable pulley and knob assembly
600-012
2
Spring standoff
2
4" eyebolt
2
Nylock nut
2
5/32" Allen key
2
Blue trap spring
2
Yellow trap spring
2
Long spring, purple
SPR9006
2
Long spring, yellow
710-010
1
Roll down bar
101-005
1 pair
Single cotton loops
210-023
1
Safety strap with carbiner
950-019
1
Allegro standing platform latch kit
DVD8205
1
Introductory DVD
TOOL NEEDED (NOT INCLUDED)
Vise grips, pliers, or adjustable wrench
Publicité
Table des Matières
