4.1.1
Click & Plug - connection coupling
The Click & Plug coupling supplied with the Connexx system is used for connecting the
system quickly and reliably with the container outlet fitting. The coupling only fits the outlet
fitting on products designed for the Connexx system.
If the size and colour of the fitting do not match that of the connection, do not attempt to
CAUTION
connect it nonetheless. Removing the fitting and opening the drum is also prohibited.
Fig. 4.3
Fig. 4.4
Never handle the system aggressively or forcefully, as this could cause damage to the
ATTENTION
coupling! If damage occurs on the coupling (such as distortion, tears or fractures), you must
inform your Ecolab support contact so that an immediate replacement can be arranged!
417101375_Connexx.doc
Pos.
Description
1
connection for hose19/27
2
handle bar
3
coupling shoe
- 36 -
Rev. 11-02.10