8.
Installation
8.1
Hydraulic connections
8.1.1
Product connection - Serto System DI/DA 4/6
Fig. 8.1
8.1.2
Product connection - Universal System DI/DA 4/6 / 4/8 / 6/12
Fig. 8.2
8.1.3
Product connection –with firm cone DI/DA 4/6 / 6/8
Fig. 8.3
417101420_pneum_II.doc
Pos.
Description
A
Stop collar
1
Valve's connector nipple
2
Hose
3
Clamping ring
4
Union nut
Cut off hose (pos. 2) at right angles.
Push the union nut (pos. 4) and clamping ring (pos. 3) over the hose
(pos. 2).
Push hose (pos. 2) onto the valve's connector nipple (pos. 1) right up
to the stop collar (pos. A).
Tighten union nut (pos. 4).
Pos.
Description
A
Stop collar
1
O-Ring
2
Tapered part
3
Hose
4
Clamping ring
5
Union nut
Cut off hose (pos. 3) at right angles.
Push the union nut (pos. 5) and clamping ring (pos. 4) over the hose
(pos. 3).
Push hose (pos. 3) right up to the stop collar (pos. A) onto the valve's
connector nipple (pos. 2)
Put O-ring (pos. 1) in valve groove and tighten union nut (pos. 5).
Pos
Description
A
Stop collar
1
Integrated cone
2
Hose
3
Union nut
Cut off hose (pos. 2) at right angles.
Push the union nut (pos. 3) over the hose (pos. 2).
Push hose (pos. 2) right up to the stop collar (pos. A) onto the valve's
connector nipple (pos. 2).
Tighten union nut (pos. 3).
- 35 -
Rev. 4-07.10