Pattern Selection - Janome Marie OsmondQC Manuel D'instructions

Janome Marie Osmond Instruction Manual
w
e
www.toews.com
q
y
r t
i o
u

Pattern Selection

Mode 1
You can select the stitch patterns #01 to #10 directly by
pressing the pattern selection buttons.
q Patten selection buttons
The buttonholes BH1 to BH3 cab be directly selected by
pressing the buttonhole selection buttons in any mode.
w Buttonhole selection buttons
The LCD screen shows the standard settings for the
selected stitch pattern.
e Pattern number and image of the selected stitch
r Stitch width or needle drop position
t Stitch length
y Recommended setting for needle thread tension
u Recommended foot pressure
i Recommended presser foot
A triangle mark will appear when a certain utility stitch is
selected. This indicates that there are alternative settings
for the selected stitch (see page 22).
o Recommended presser foot
Mode 2, 3 and Lettering
To select a stitch pattern, enter the 2-digit number of the
desired stitch pattern by pressing the corresponding
number buttons.
Please refer to the stitch chart to find the pattern number of
the desired stitch.
Example: stitch pattern #31
Press the button number "3" and button number "1".
The pattern number appears for a while.
The LCD screeen shows the selected stitch pattern and
setting information.
Marie Osmond Owners Manual/ User Guide
20
Janome Sewing Machine