Pattern Selection; Presser Foot Lifter; To Attach And Remove The Presser Foot; Reverse Stitch Lever - Janome 665 Jem Gold 3 Manuel D'instructions

Table des Matières

Publicité

Janome 665 Instruction Manual
q
w
q
z
q
q
w
www.toews.com
16
w
w
q
e
x
w
q
w

Pattern Selection

Raise the needle, turn the pattern selector dial to select
the desired pattern.
Note:
Do not turn the pattern selector dial while the needle is in
the fabric, otherwise the needle may bend or break.
q Pattern indication window
w Pattern selector dial

Presser Foot Lifter

The presser foot lifter raises and lowers the presser foot.
You can raise it about 0.6 cm (1/4˝) higher than the
normal up position for easy removal of the presser foot or
to help you place heavy fabric under the foot.
q Normal up position
w High position
e Presser foot lifter

To Attach and Remove the Presser Foot

z Raise the presser foot. Press the lever on the back of
the foot holder.
The presser foot will drop off.
q Lever
x Place the selected presser foot so the pin on the
foot lies just under the groove of the foot holder.
e
Lower the presser bar to lock the foot in place.
w Groove
e Pin

Reverse Stitch Lever

The machine will sew in reverse while the reverse stitch
lever is depressed.

How to Drop the Feed Dog

The drop feed dog lever is located underneath the free
arm bed on the back side of the machine.
To drop the feed dog, slide the drop feed dog lever to the
right q.
To raise the feed dog, slide the drop feed dog lever to the
left w, and turn the handwheel toward you.
The feed dog must be up for normal sewing.
Jem Gold Owners Manual/ User Guide

Publicité

Table des Matières
loading

Table des Matières