Winding The Bobbin - Janome 665 Jem Gold 3 Manuel D'instructions

Janome 665 Instruction Manual
z
x
q
w
b
n
m
,
www.toews.com
20

Winding the bobbin

z Pull the handwheel away from the machine to
x Guide the thread around the thread guide q and
c Thread through the hole in the bobbin from the
v Put the bobbin on the bobbin winder spindle e with
c v
e
b Push the bobbin to the right.
n With the free end of the thread held in your hand,
m Depress the foot control again. When the bobbin
, To engage the clutch, push the handwheel in.
disengage the clutch.
bobbin winder thread guide w in order as illustrated.
inside to the outside.
the free end of the thread coming out at the top.
q Thread guide
w Bobbin winder thread guide
e Bobbin winder spindle
depress the foot control. Stop the machine when
the bobbin has made a few turns, and cut the thread
close to the bobbin.
is fully wound, it will stop automatically.
Return the bobbin winder to its original position
by moving the spindle to the left, and cut the
thread as illustrated.
Jem Gold Owners Manual/ User Guide