Winding The Bobbin; Setting The Spool; Extra Spool Pin; Removing The Bobbin - Janome Sew Precise Livret D'instructions

q
w
w
e
A
B
e r
t
q

Winding the Bobbin

Setting the spool

Place a spool of thread on the spool pin with the thread
coming off the spool as illustrated.
A: Press the large spool holder firmly against the spool
of thread.
q Large spool holder
B: For a small spool, use the small spool holder.
w Small spool holder

Extra spool pin

The extra spool pin is for bobbin winding without
unthreading the machine.
Insert the extra spool pin into the hole.
Place the felt and a spool on the pin.
e Extra spool pin
r Spool pin felt
t Spool pin hole

Removing the bobbin

Push the hook cover plate release button to the right
and remove the cover plate.
q Hook cover plate release button
w Hook cover plate
Lift out the bobbin.
e Bobbin
14