Drawing Up Bobbin Thread; Adjusting The Needle Thread Tension - Janome Sew Precise Livret D'instructions

z
x
c
q
w
q
A
e
q
B

Drawing up Bobbin Thread

1
Raise the presser foot. Hold the needle thread lightly
with your left hand and rotate the handwheel
counterclockwise for one complete turn.
2 Bring the bobbin thread up by pulling the needl
thread up.
Pull both threads 4" to 6" (10.0 to 15.0 cm) under and
3
behind the presser foot.

Adjusting the Needle Thread Tension

Correct tension
The ideal straight stitch has threads locked between two
layers of fabric, as illustrated.
q Right side (Top side) of fabric
w Needle thread (Top thread)
e Bobbin thread (Bottom thread)
When adjusting the needle thread tension, the higher
the number, the tighter the top thread tension.
A: Tension is too tight
The bobbin thread shows through on the wrong side of
the fabric, and the stitch feels bumpy. Turn the dial to a
lower tension setting number to loosen the needle
thread tension.
B: Tension is too loose
The needle thread shows through on the wrong side
of the fabric, and the stitch feels bumpy. Turn the dial to
a higher tension setting number to tighten the needle
thread tension.
24