Table des Matières
Publicité
1
4
3
2
#
8
6.5 0.5 — 4
STRAIGHT STITCH
Connecting Machine to Power Supply
Before connecting the power cord, make sure the
6
voltage and frequency shown on the machine conform
to your electrical power.
1. Turn off the power switch q.
2. Insert the foot control plug w, machine plug e into
the machine socket r.
5
3. Insert the power supply plug t into the outlet y.
4. Turn the power switch on.
For Your Safety:
* While in operation, always keep your eyes on the
sewing area. Do not touch any moving parts such as
the thread take-up lever, handwheel or needle.
* Always turn off the power switch and unplug from the
power supply:
- When leaving the machine unattended.
- When attaching or removing any parts.
- When cleaning the machine.
* Do not place anything on the foot control, when not
sewing.
Controlling Sewing Speed
Foot control
Sewing speed is varied by the foot control.
The harder you press on the foot control, the faster the
machine runs.
Speed control lever
Sewing speed can be varied by the speed control lever
according to your sewing needs.
To increase sewing speed, slide the lever to the right.
To decrease sewing speed, slide the lever to the left.
Operating Instructions:
The symbol "O" of a switch indicates the "off" position of
the switch.
For an appliance with a polarized plug (one blade wider
than the other):
To reduce the risk of electrical shock, this plug is
intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way.
The foot controller Model 21361 is used with the sewing
machine Model Sew Precise (USA market only).
Selecting Language
q
You can select one of the following languages by
pressing the language key q.
English
French
NOTE:
Press and hold the key for 1 second or longer.
8
Italian
Spanish
German
Dutch
Publicité
Table des Matières
