Winding The Bobbin - Janome Sew Precise Livret D'instructions

z
x
B
A
c
v b
n
m

Winding the bobbin

q
z Pull out the handwheel to disengage the clutch.
x Draw the thread from the spool. Guide the thread
c Thread through the hole in the bobbin from the
v Push the bobbin to the right.
NOTE:
Do not move the bobbin winder spindle while the
machine is running.
b With the free end of the thread held in your hand,
n Depress the foot control again. When the bobbin is
m Push in the handwheel to engage the clutch.
16
q Handwheel
around the bobbin winder thread guide.
w Bobbin winder thread guide
A: From horizontal spool pin
B: Frm extra spool pin
inside to the outside.
Put the bobbin on the bobbin winder spindle with the
free end of the thread coming out at the top.
e Bobbin winder spindle
depress the foot control. Stop the machine when the
bobbin has been wound a few layers, and cut the
thread close to the bobbin.
fully wound, it will stop automatically.
Return the bobbin winder to its original position by
moving the spindle to the left, and cut the thread as
illustrated.