Balancing Needle Thread Tension; Correct Tension; Tension Is Too Tight; Tension Is Too Loose - Janome 665 Jem Gold 3 Manuel D'instructions

Table des Matières

Publicité

Janome 665 Instruction Manual
q
r
t
t
www.toews.com
30
e
r
w
e

Balancing Needle Thread Tension

Correct tension

The ideal straight stitch will have threads locked between
the two layers of the fabric, as illustrated (magnified to
show detail).
If you look at the top and bottom of the seam, you will
notice that there are no gaps. Each stitch is smooth and
even.
Turn the dial to alter the needle thread tension. The
higher the number, the tighter the tension.
Results depend on:
– stiffness and thickness of the fabric
– number of fabric layers
– type of stitch
q Needle thread (Top thread)
w Bobbin thread (Bottom thread)
e Wrong side of fabric
r Right side of fabric

Tension is too tight

The bobbin thread shows through on the right side of the
fabric and it feels bumpy.
Turn the thread tension dial upwards (to a smaller
number) to loosen the needle thread tension.
t Thread tension dial

Tension is too loose

The needle thread shows through on the wrong side of
the fabric and it feels bumpy.
Turn the thread tension dial downwards (to a larger
number) to tighten the needle thread tension.
Jem Gold Owners Manual/ User Guide

Publicité

Table des Matières
loading

Table des Matières