Section 2. Getting Ready To Sew; Connecting Machine To Power Supply; Controlling Sewing Speed; Operating Instructions - Janome 665 Jem Gold 3 Manuel D'instructions

Janome 665 Instruction Manual
t
w
www.toews.com
12
z
v
r
c
x
e
q

SECTION 2. GETTING READY TO SEW

Connecting Machine to Power Supply

Before connecting the power cord, make sure the voltage
and frequency shown on the machine conform to your
electrical power.
q Machine plug
w Machine socket
e Power supply plug
r Electrical outlet
t Power switch
z Turn off the power switch t.
x Insert the machine plug q into the machine
socket w.
c Insert the power supply plug e into the
electrical outlet r .
v Turn the power switch t to turn on the power and
sewing light.

Controlling Sewing Speed

Sewing speed can be varied by the foot control.
The harder you press on the control, the faster the
machine runs.

Operating Instructions:

The symbol "O" on a switch indicates the "off" position
of a switch.
Foot Controller Model YC-482J-EC or TJC-150 is used
with Sewing Machine Model 661.
This appliance has a polarized plug (one blade wider
than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way.
If the plug does not fit in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way.
Jem Gold Owners Manual/ User Guide