Using The Needle Threader - Janome 665 Jem Gold 3 Manuel D'instructions

Janome 665 Instruction Manual
z
q
x
c
q
v
www.toews.com
26
w
e

Using the needle threader

z Turn the handwheel toward you to raise the
needle to its highest position. Hold the needle
threader knob q and pull it down to its lowest
position.
q Needle threader knob
x Push the needle threader knob q to the back so
that the hook e is coming out from the backside of
the needle eye.
Hook the thread around the guide w from the left.
Pass the thread under the threader hook e and draw
the thread to the right.
w Guide
e Needle threader hook
c Push the needle threader knob q towards you to
pull out the needle thread as illustrated. Then push
the knob q up to pull the needle thread as illustrated.
v Pull the needle thread through the needle eye.
* The needle threader can be used with a #11 to #16
needle or a blue needle.
Thread size 50 to 90 should also work well.
Jem Gold Owners Manual/ User Guide