Table des Matières
Publicité
Janome 665 Instruction Manual
w
q
www.toews.com
34
q
r
e
t
w
w
e
Using the seam guides on the needle plate
The seam guides on the needle plate and hook cover
plate help you to measure seam width.
* The numbers indicate the distance between the
center needle position and the guide line.
Numbers on the needle plate
Distance in centimeters
q Guide lines
w Cornering guide
e Needle plate
r Center needle position
t Seam width from the center needle position
Turning square corners
To turn a square corner 1.6 cm (5/8˝) from the fabric
edge:
When the fabric edge facing you lines up with the
cornering guide as illustrated, stop stitching and
lower the needle by turning the handwheel towards you.
Raise the presser foot and turn the fabric to line
the edge with the 1.6 cm (5/8˝) seam guide.
Lower the presser foot and begin stitching in the new
direction.
w Cornering guides
Triple Straight Stitch
Machine setting:
q Stitch selector:
w Presser foot:
e Thread tension dial:
* It is not necessary to adjust the stitch length.
This strong, durable pattern is recommended where both
elasticity and strength are needed to insure comfort and
durability. Use it to reinforce areas such as crotch and
armhole seams. Also, use when constructing items such
as backpacks for extra strength.
The pattern is sewn with two stitches forward and one
stitch backward, forming a seam that does not rip easily.
Garments should be basted for fitting before seaming.
Jem Gold Owners Manual/ User Guide
15
20 4/8˝ 5/8˝ 6/8˝
1.5 2.0 1.3 1.6
1.9
Zigzag foot (A)
2-6
Publicité
Table des Matières
