Threading The Needle On The Right - Janome 3434D Livret D'instructions

1
5
6
7
8
1
(A)
1
2
40
2
3
4
(B)
2
•

Threading the Needle on the Right

Place the spool of thread on the spool pin second
from the left.
* The points to thread for needle on the right are
marked in blue.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the thread guide second
from the left from back to front.
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown.
1
Thread guide
2. Pass the thread through the holes in the second
row from the left of the thread guide plate as
illustrated.
2 Thread guide plate