The Position Of Thread Guide Bar; Attaching The Spool Holder Cap And Net - Janome 3434D Livret D'instructions

2
1 2
1
1
2
14

The Position of Thread Guide Bar

1
1. Pull the thread guide bar up as far as it will go.
2. Turn the thread guide bar so that the thread
3
4

Attaching the Spool Holder Cap and Net

3
1. When you use a small thread spool, pull out the
4
2
2. If the thread slips down from the spool
* The spool holder cap and net are optional
2
1
guides are right above the spool pins.
1 Thread guide bar
2 Thread guide
3 Stoppers
4 Spool pin
spool holder from the spool pin. Then place the
spool with its slit side up, and put the spool
holder cap on top of it.
1 Spool holder
2
Spool pin
3
Spool holder cap
4 Slit
during threading and/or sewing, put a net on the
spool as illustrated to prevent jamming.
accessories.
1 Net
2 Spool pin