Winding The Bobbin; Setting The Spool; Removing The Bobbin - Janome 509 Livret D'instructions

(A)
q
(B)
w
e
r
t
q
w
e

Winding the Bobbin

Setting the spool

Place a spool of thread on the spool pin with the thread
coming off the spool as illustrated.
A: Press the large spool holder firmly against the spool
of thread.
q Large spool holder
B: For a small spool, use the small spool holder.
w Small spool holder
Additional spool pin
The additional spool pin is for bobbin winding without
unthreading the machine.
Insert the additional spool pin into the hole.
Place the felt and a spool on the pin.
e Additional spool pin
r Spool pin felt
t Spool pin hole

Removing the bobbin

z Push the hook cover plate release button to the right
and remove the cover plate.
q Hook cover plate release button
w Hook cover plate
x Lift out the bobbin.
e Bobbin
20