Table des Matières
Publicité
q
w
q
w
q
e
r
q
e
r
q
Fagoting
Machine setting
q Stitch pattern:
w Stitch length:
e Thread tension: 1 – 4
r Presser foot:
Use this stitch to join two pieces of fabric to create an
open work appearance, and add design interest.
Fold under each fabric edge 1/2" (1.3 cm) and press.
Pin the two edges to a piece of paper or tear-away
backing 1/8" (0.3 cm) apart.
q Paper
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
Tear away the backing after sewing is finished.
Patchwork
Machine setting
q Stitch pattern:
w Stitch length:
e Thread tension: 1 – 4
r Presser foot:
Place two layers of the fabric with the right sides
together. Using a straight stitch, sew a seam.
Open seam flat.
Place the fabric under the foot so that the seam line
matches the center of the foot width.
Lower the foot and sew the pattern along the seam line.
q Right side of the fabric
58
H
1 – 3
Zigzag foot A
D
1 – 3
Zigzag foot A
Publicité
Table des Matières
