Fagoting; Patchwork - Janome 625E Livret D'instructions

Masquer les pouces Voir aussi pour 625E:
Table des Matières

Publicité

q
w
r
t
q
w
r
t
q
e
q
e
q

Fagoting

Machine setting
q Stitch pattern: H
w Stitch width:
3 – 5
e Stitch length:
1 – 3
r Thread tension:1 – A
t Presser foot:
Zigzag foot A
Use this stitch to join two pieces of fabric to create an
open work appearance, and add design interest.
Fold under each fabric edge 1/2" (1.3 cm) and press.
Pin the two edges to a piece of paper or tear-away
backing 1/8" (0.3 cm) apart.
q Paper
Sew slowly, guiding the fabric so the needle catches the
folded edge on each side.
Tear away the backing after sewing is finished.

Patchwork

Machine setting
q Stitch pattern: D
w Stitch width:
5
e Stitch length:
1 – 3
r Thread tension:1 – A
t Presser foot:
Zigzag foot A
Place two layers of the fabric with the right side together.
Seam along the edges with the straight stitch.
Open fabrics flat and fold each seam allowances.
Place the fabric under the foot so that the seam line
matches the center of the foot width.
Lower the foot and sew the pattern along the seam line.
q Right side of the fabric
78

Publicité

Table des Matières
loading

Table des Matières