Janome 625E Livret D'instructions page 70

b
!4
n
b Raise and release the foot, and re-attach it with the
left side pin.
Starting just below zipper bottom stop, sew across
fabric to about 3/8" (1 cm) distance from the
basting line.
Turn fabric 90 degrees and sew a seam the entire
length of the zipper tape. Before reaching the slider,
stop the machine with needle in fabric and raise the
foot. Use seam ripper to open a few inches of basting
stitch.
!3
!3 Unstitch basting
!4 3/8" (1 cm)
n Unzip a few inches to clear a path for stitching.
At end of seam, sew a few stitches in reverse to lock.
Once both sides of zipper are sewn, use the seam
ripper to open the basting stitch.
66