Section 4. Utility Stitches Basic Zigzag; Overcasting - Janome 625E Livret D'instructions

q
r t
q
r
t
w
e
w
e
y
SECTION 4. UTILITY STITCHES
Basic Zigzag
Machine setting
q Stitch pattern: C
w Stitch width:
1 – 5
e Stitch length:
0.5 – 3
r Thread tension: A
t Presser foot:
Zigzag foot A
Simple zigzag stitching is widely used for overcasting,
sewing on buttons etc.
Adjust the stitch length to suit your sewing needs.
NOTE:
Use a stabilizer for stretch fabrics such as tricot and
knits to prevent puckering.

Overcasting

Machine setting
q Stitch pattern: C
w Stitch width:
5
e Stitch length:
1 – 2
r Thread tension: A
t Presser foot:
Overedge foot C
Overcasting is used to prevent fabrics from raveling at
raw edges. It can be used to finish a hem edge.
Place the edge of the fabric next to the guide of foot and
sew while guiding the fabric edge along the guide.
y Guide
CAUTION:
Do not set the stitch width less than 5 when using the
overedge foot C, otherwise the needle may hit the foot
causing the needle to bend or break.
42