Pintucking; Applique - Janome Marie OsmondQC Manuel D'instructions

Table des Matières

Publicité

Janome Marie Osmond Instruction Manual
q
q
q
www.toews.com
e
w
e
r
w
w
e
106

Pintucking

q Pattern:
#4 (mode 1)
w Presser foot:
Blind hem foot G
e Thread tension:
AUTO
Fold a fabric with the right side together.
Place the folded fabric under the blind hem foot.
Align the edge of the fold with the guide on the foot, and
lower the foot.
Sew while guiding the edge of the fold along the guide.
Open the fabric and press the tuck to one side.

Applique

q Pattern:
#35, #63-#68 (mode 2)
w Presser foot:
Satin stitch foot F
e Thread tension:
AUTO
r Foot pressure:
2
Place an applique on the fabric and baste or pin it in place.
Reduce the foot pressure.
Sew while guiding the fabric so the outer edge of the
applique aligns with the slit of the foot.
q Applique
w Slit
e Outer edge
Wen turning around a corner, stop the machine and press
the up/down needle position button to lower the needle at
the outer edge of the applique.
Raise the presser foot and pivot the fabric around te
needle to change the sewing direction.
NOTE;
The stitch width of patterns #65-67 is fixed, but the needle
drop position will move to the left or right by pressing the
stitch width adjusting button.
Marie Osmond Owners Manual/ User Guide
Janome Sewing Machine

Publicité

Table des Matières
loading

Table des Matières