Janome Marie OsmondQC Manuel D'instructions page 147

Janome Marie Osmond Instruction Manual
q
(+)
(+)
(–)
(+)
(+)
www.toews.com
(–)
(–)
(–)
Correcting Distorted Stitch Patterns
The sewing results of the stretch patterns may vary
depending upon the sewing conditions, such as sewing
speed, type of the fabric, number of layers etc.
Always test sew on a scrap piece of the fabric that you
wish to use.
If stretch patterns, letters or numbers are distorted, correct
it with the feed balancing dial.
q Feed balancing dial
Stretch stitch pattern
If the pattern is compressed, turn the feed balancing dial in
the direction of "+".
If the pattern is drawn out, turn the feed balancing dial in
the direction of "–".
Letters and numbers
If the pattern is compressed, turn the feed balancing dial in
the direction of "+".
If the pattern is drawn out, turn the feed balancing dial in
the direction of "–".
Stitch balance of buttonholes #19 and #21
(mode 2)
If the right row is denser, turn the feed balancing dial in the
direction of "+".
If the left row is denser, turn the feed balancing dial in the
direction of "–".
Evenness of bartacking
If the stitch does not meet start position, turn the feed
balancing dial in the direction of "+".
If the stitch does not meet return position, turn the feed
balancing dial in the direction of "–".
Marie Osmond Owners Manual/ User Guide
146
Janome Sewing Machine