Device Components; Bus Coupler - Aventics HF03 LG Mode D'emploi

56 AVENTICS | EtherCAT | R412012792–BDL–001–AB
Device description
7
6
Fig. 2: Bus coupler overview
1 LED displays for diagnostic messages
2 Bus slave label
3 X71 (BUS IN) connection for the bus coupler to control the valves
4 X72 connection (BUS OUT) for the bus coupler
5 X10 connection (POWER) to supply power to the electronics and valve coils
6 Screw cap A: DIP switch S1 (diagnosis settings)
7 Screw cap B: Sliding switch S2 (valve assignment and power supply)
8 FE connection
9 Pocket for slide-in labels (see "Spare parts and accessories" on page 83)
1)
For plug assignment, see pages 61 and 63.

5.2 Device components

5.2.1 Bus coupler

9
8
9
1
2
1)
3
4
5
1)