Extent Of Delivery; Technical Data; Characteristic Noise Values - ATIKA BS 205 Notice Originale

Extent of delivery

• Band saw BS 205 with saw band (pre-assembled device unit)
Saw table
Table insert
Parallel stopper
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or the manufacturer immediately. Complaints made at a later date will not
be acknowledged.
Electrical devices do not go into the domestic rubbish. Give devices, accessories and packaging to an ecofriendly recy-
cling.
According to the European Directive 2002/96/EC on electrical and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a facility for an environmentally compatible recycling.

Technical data

Typ
Motor output P
1
Mains voltage
Mains frequency
No-load speed
Mains fuse
Cutting speed
Length of saw band
Width of saw band
Max. thickness of saw band
Saw band roll
Saw table size
Transverse adjustment saw table
max. cutting height
max. passageway width
Exhaust outlet
Dimensions (length x breadth x height)
Weight
Commercial, small dust collectors or industrial vacuum cleaners are used for vacuuming.

Characteristic noise values

DIN EN ISO 3746 / DIN EN ISO 11202 / ISO 7960 Appendix A
Application of machine as band saw with standard saw band.
Sound level (with load):
L = 93.1 dB(A)
WA
The factor of measurement uncertainty is 4 dB.
The values given are emission values and must therefore not simultaneously represent safe workplace values too. Although there is a relationship
between emission and immission levels, it can be reliably deduced whether additional precautionary measures are necessary or not. Factors, which
can influence the immission level currently existing at the workplace include the duration of the effects, the special type of the workroom, other noise
sources, etc. e.g. the number of machines and other adjacent processes. The permissible workplace values can also vary from country to country.
This information should however enable an improved assessment of the danger and risk to be carried out.
Sound level at the workplace (with load):
L = 83.2 dB(A)
pA
•
•
•
BS 205
370 W (S2 / 15 min.)
230 V~
50 Hz
1400 min
–1
10 A
15 m/sec.
1400 mm ± 5
6,5 ± 1 mm
0,35 ± 0,05 mm
∅ 205 mm
300 x 300 mm
0 – 45 °
80 mm
195 mm
∅ 48 / 60 mm
450 x 380 x 465 mm
approx. 18 kg
24
Pushstick
Bag of screws
Operating instructions