Characteristics Noise Values; Symbols Machine; Extent Of Delivery - ATIKA UZT 250 Mode D'emploi

Contents

Characteristics noise values

Symbols machine

Symbols Operating instructions

Extent of delivery

Normal intended use
Residual risks
Safe working
Assembly
Before the first start-up
Start-up
Adjustments on the saw
Working instructions
Maintenance and cleaning
Transport
Storage
Guarantee
Description of device / spare parts
Possible faults
Technical data
EC Declaration of Conformity
Characteristics noise values
DIN EN ISO 3746 / DIN EN ISO 11202 / ISO 7960 Appendix A
Application of the machine as pull-push saw with standard saw
blade.
Noise power level
No-load L = 101,4 dB(A)
WA
Load L = 108,5 dB(A)
WA
The factor of measurement uncertainty is 4 dB.
For operation as pull-push saw the same sound levels can be
taken as basis.
The values given are emission values and must therefore not simulta-
neously represent safe workplace values too. Although there is a
relationship between emission and immersion levels, it can be reliably
deduced whether additional precautionary measures are necessary or
not. Factors, which can influence the immersion level currently existing
at the workplace include the duration of the effects, the special type of
the workroom, other noise sources, etc. e.g. the number of machines
and other adjacent processes. The permissible workplace values can
also vary from country to country. This information should however
enable an improved assessment of the danger and risk to be carried
out.
Symbols machine
Carefully read
operator's manual
and the safety
instructions before
starting the ma-
chine and observe
the instructions
when operating.
16
16
16
16
17
17
17
19
19
20
20
21
22
23
23
23
24
24
25
25
Sound pressure level at
the workplace
L = 90,6 dB(A)
pA
L = 96,3 dB(A)
pA
Before starting
any repair, main-
tenance or
cleaning work,
always switch off
the motor and
remove the plug
from the socket.
Risk of injuries of
fingers and hands
by the saw blade
Wear eye and ear
protection
Electrical devices do not go into the domestic rub-
bish. Give devices, accessories and packaging to an
ecofriendly recycling.
According to the European Directive 2002/96/EC on
electrical and electronic scrap, electrical devices that are no
longer serviceable must be separately collected and brought to
a facility for an environmentally compatible recycling.
Symbols operating manual
Threatened hazard or hazardous situation. Not ob-
serving this instruction can lead to injuries or cause
damage to property.
Important information on proper handling. Not ob-
serving this instruction can lead to faults.
User information. This information helps you to use all
the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Extent of delivery
• UZT 250 pull-push saw with mains cable and connector, with
HM saw blade Ø 250/30 mm x 2.6/1.6, 48 teeth, alternate
tooth and blade guard 2.4 mm thick
• Safety guard with exhaust outlet
• Adapter for extraction hose
• Exhaust neck
• Extraction hose (2)
• Push stick
• Universal guide with guide carrier
• Screw bag
• 2 spanners for replacing saw blade
• Operating manual
• Optional accessories: Stand
☞
After unpacking, check the contents of the box
That it is complete
Check for possible transport damage
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
16
Do not expose to
rain. Protect
against humidity.
Wear dust mask.