Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Contents
EC Declaration of Conformity
according to EC directive: 2006/42/EC
We,
ATIKA GmbH & Co. KG
Schinkelstraße 97, 59227 Ahlen - Germany
herewith declare under our sole responsibility that the product
Kapp- und Gehrungssäge (Crosscut and Mitre Saw)
Model KGS 210 N
Serial number: 000001 - 020000
is conform with the above mentioned EC directive as well as
with the provisions of the guidelines below:
2004/108/EC and 2006/95/EC
Following harmonized standards have been applied:
EN 55014-1:2006/+A1 :2009;
EN 55014-2:1997/+A1:2001/+A2 :2008;
EN 61000-3-2:2006/+A1 :2009/+A2 :2009;
EN 61000-3-3:2008; EN 61029-1:2009; EN 61029-2-9:2009
Duly authorised person for the complilation of technical
documents:
ATIKA GmbH & Co. KG - Technical department
Schinkelstr. 97 - 59227 Ahlen - Germany
Ahlen, 05.07.2011
Extent of delivery
• Crosscut and mitre saw KGS 210 N (preassembled unit)
• Dust bag
• Accessories bag
• Original instructions
13
A. Pollmeier, management
After unpacking, check the contents of the box
That it is complete
13
Check for possible transport damage
13
Report any damage or missing items to your dealer, supplier or
13
the manufacturer immediately. Complaints made at a later date
13
will not be acknowledged.
14
14
14
Symbols machine
14
16
Carefully read
16
operator's manual
17
before handling the
17
machine. Observe
18
instructions and
18
safety rules when
19
operating.
19
Risk of injuries of
19
fingers and hands
20
by the saw blade
20
Wear eye and ear
protection
This product com-
plies with Europe-
an regulations
specifically appli-
cable to it.
Symbols Original instructions
Threatened hazard or hazardous situation. Not ob-
serving this instruction can lead to injuries or cause
damage to property.
Important information on proper handling. Not ob-
serving this instruction can lead to faults in the machine.
User information. This information helps you to use all
the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Characteristic noise values
DIN EN ISO 3744 / DIN EN ISO 11202 / ISO 7960 Appendix A
Use of machine as crosscut and mitre saw with standard saw
blade.
Noise power level
L
= 102 dB(A)
WA
The factor of measurement uncertainty is 3 dB.
The values given are emission values and must therefore not simulta-
neously represent safe workplace values too. Although there is a
relationship between emission and immersion levels, it can be reliably
deduced whether additional precautionary measures are necessary or
not. Factors, which can influence the immersion level currently existing
at the workplace include the duration of the effects, the special type of
Shut off engine
and remove
power cord be-
fore performing
cleaning, mainte-
nance or repair
work.
Do not expose to
rain. Protect
against humidity.
Wear dust mask.
Machine of the
protection class II
(double insulat-
ed)
Sound pressure level at the workplace
L
= 89 dB(A)
PA
Publicité
Chapitres
Table des Matières
