Vibrations; Normal Intended Use; Residual Risks; Safety Instructions - ATIKA KGS 210 N Notice Originale

the workroom, other noise sources, etc. e.g. the number of machines
and other adjacent processes. The permissible workplace values can
also vary from country to country. This information should however
enable an improved assessment of the danger and risk to be carried
out.

Vibrations

Vibration: 6.0 m/s²
Measuring uncertainty K: 1.5 m/s²
The indicated vibration emission level has been measured ac-
cording to a standardised test method and can be used to com-
pare power tools.
It can also be used for an initial estimate of exposure.
The vibration emission level can differ from the indicated value
during actual use of the power tool depending on the manner of
usage.
Try to minimise the exposure to vibration. Precautions for mini-
mising exposure to vibration include wearing of gloves when
operating the machine and limiting of operation cycles. For this,
all portions of the operating cycle have to be considered (e.g.
times during which the power tool is cut off and times during
which it is switched on, but runs without load).

Normal intended use

The device is suitable to cut wood and other wood-type
materials (e.g. particle boards) in the house and hobby field.
The device is suitable for crosscuts, inclined cuts, mitre cuts
and double mitre cuts.
The cutting of round material and irregularly shaped materi-
als (rickers, poles, fire wood etc.) is not permitted since the-
se work pieces cannot be held securely.
Only work pieces that can be put down securely and held
with clamping devices may be processed.
The use of saw blades made of HSS steel (high-alloy high
speed steel) is not permitted since this steel is hard and brit-
tle. Risk of injury through saw blade breakage and expulsion
of saw blade pieces.
The intended usage also includes compliance with the oper-
ating, servicing and repair conditions prescribed by the man-
ufacturer and following the safety instructions included in the
instructions.
The relevant accident prevention regulations for the opera-
tion as well as the other generally acknowledged occupa-
tional medicine and safety rules must be complied with.
Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
Independently made alterations to the circular saw preclude
any liability of the manufacturer for resulting damages of any
kind.
The circular saw may only be equipped, used and serviced
by persons who are familiar with these and have been in-
structed in the hazards. Repair works may only be carried
out by us or by a customer service agent nominated by us.
The machine may not be used in a potentially explosive
environment or be exposed to the rain.
Metal parts (nails, etc.) must be removed from the timber to
be sawn.

Residual risks

Even if used properly, residual risks can exist even if the rele-
vant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety information" and
the "Intended usage" as well as the whole of the original instruc-
tions are observed.
Observing these instructions, and taking proper care, will reduce
the risk of personal injury or damage to the equipment.
Danger of injury of fingers and hands by the tool (saw blade)
or work piece, e.g. when replacing the saw blade.
Injury from parts of the workpiece spinning off.
Throwback of the workpiece or workpiece parts.
Breakage and expulsion of saw blade.
Risk from electricity, by using non-standard electrical con-
nections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
Emission of harmful timber dust when operating without
exhaust suction.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.

Safety instructions

Wood processing machines can be dangerous when
used improperly. The use of electrical tools requires the
observation of basic safety precautions to eliminate risk of
fire, electrical shock and personal injuries.
Before commissioning this product, read and keep to the
following advice. Also observe the preventive regulations of
your professional association and the safety provisions
applicable in the respective country, in order to protect
yourself and others from possible injury.
Pass the safety instructions on to all persons who work
with the machine.
Keep these safety instructions in a safe place.
Make yourself familiar with the equipment before using
it, by reading and understanding the original instruc-
tions.
Be observant. Attend to what you do. Start working with
rationality. Do not use the device when you are tired or
under the influence of drugs, alcohol or medicaments.
One moment of carelessness when using the device can
result in serious injuries.
Avoid unusual posture. Ensure that you have stand in a
secure standing position and maintain your balance at all
times. Do not lean forward.
Wear suitable work clothes:
14