Transport; Storage; Guarantee - ATIKA BS 205 Notice Originale

Is the saw band moved manually it shall not touch the
support roller
6. Refasten hexagon head screw.
7. Put back the lower saw band coping back before the saw
band.
8. Close again both case doors.
9. Remount saw table plate.
Replace table insert
Replace a worn-out or damaged table insert immedi-
ately
.
Push the table insert from
below out of the saw
table and replace it by a
new table insert.

Transport

Remove mains plug before each transport.
Transport the saw only with:
− the upper saw band guidance positioned completely
downwards
− unscrewed jutting out accessories

Storage

Remove the mains plug from the socket.
Store unused equipment in a dry, locked place out of the
reach of children.
To extend the service life of the saw and guarantee smooth
operation, before storing for a longer period
− thoroughly clean the saw
− treat all movable parts with an environmentally friendly
oil
Never use any grease!

Guarantee

Please observe the enclosed terms of guarantee.
33