Assa Abloy OneSystem 819N Notice De Montage page 63

At tention!
A
Property damage due to missing profile cylinder in locked door: The electric multi-point lock 819N
locks a closed door automatically and can then only be unlocked again via the profile cylinder. If a locking
cylinder is not installed, the door can only be opened by force. A construction locking cylinder must be
installed before the electric multi-point lock 819N is installed.
Property damage from construction key: The use of a so-called construction key can destroy the lock.
Then the function is no longer guaranteed. Only use a suitable locking cylinder for operation of the lock
according to DIN 18252 or SN EN 1303 (Fig. 28, page 207).
Installing the lock
!
Warning!
Danger to life due to electric shock: Improper wiring is life-threatening and can ruin the electric multi-
point lock 819N. The connection of the power supply may only be carried out by a trained, qualified person.
Risk of injury and life-threatening danger due to dangerous installation work. The machines and tasks
required for complete installation entail a considerable risk of injury. The cutting and preparations in
wood and metal may only be carried out by skilled, qualified personnel who are trained in the necessary
safety measures for the avoidance of severe injury, particularly when handling milling machines, saws, and
drilling machines.
Unsuitable doors reduce personal safety and intrusion protection: Only approved and technically flaw-
less doors are suitable for installation of the electric multi-point lock 819N. Prior to the installation of the
electric multi-point lock 819N, the door must be checked to ensure that it is attached properly and is not
warped. The door must be approved for use of the electric multi-point lock 819N.
EN
63
Installation