Escape Door Function/Emergency Exit And; Product Versions - Assa Abloy OneSystem 819N Notice De Montage

Panic door lock in
accordance with
EN 1125
Product information
The electric multi-point lock 819N offers
· mechanical automatic locking ("Self-locking", page 56),
· mechanical automatic locking process control between latch and control latch,
· an electronically controlled door handle,
· monitoring function with use of the OneSystem IO module N5950
("Electrical accessories", page 79 and separate manual D00852 DE EN FR or D00853 DE IT NL),
· office function (permanent unlocking function),
· intrusion resistance with a solid, hardened deadbolt,
· 20 mm bolt throw,
· intrusion resistance up to Resistance Class 4 can be achieved in suitable door systems,
· escape door function in accordance with EN 179 possible,
· panic door function in accordance with EN 1125 possible,
· reversible panic side ("Changing the panic side", page 67),
· reversible between fail-locked / fail-unlocked operation ("Explanation of terms", page 54),
· suitable for fire doors (proof by fire testing in accordance with DIN EN 1634-1),
· deadbolt counterforce of 6,000 N,
· lateral deadbolt resistance of 20,000 N.
Escape door function/emergency exit and panic door locks
In general: A door with escape door function can always be opened with the door handle from the inside,
even if it is locked.
Escape doors are equipped with
· Emergency exit locks in accordance with EN 179
· Panic door locks in accordance with EN 1125
Panic doors are subject to somewhat more stringent requirements than emergency exit doors. Panic door
locks in accordance with EN 1125 are equipped with a panic push bar or panic touch bar (panic bar)
across the width of the door leaf. Emergency exit door locks in accordance with EN 179 are equipped with
a door handle.

Product versions

There are
· product versions with escape door function and door handles that can be engaged and disengaged on
one side
· Special versions without escape door function and with door handles that can be engaged and disen-
gaged on both sides
EN
45