Commissioning; Unpacking The Centrifuge; Removing The Transport Lock - Hettich Rotina 420 R Mode D'emploi

Commissioning

5 Commissioning
5.1

Unpacking the centrifuge

5.2

Removing the transport lock

22 / 64
CAUTION
Danger of crushing due to parts falling out of the transport
packaging.
−
Keep the device balanced during the unpacking
process.
−
Only open the packaging at the points provided for this
purpose.
CAUTION
Risk of injury from lifting heavy loads.
−
Provide an adequate number of helpers.
−
Note the weight. See ⮫
on page 10 .
NOTICE
Damage to the device due to improper lifting.
−
Do not lift the centrifuge by the control panel or the
control panel holder.
Personnel:
■
Trained user
1. If present: Remove the packaging tapes.
2. Lift the box up and remove the padding.
3. Remove the accessories and store them safely.
4. Place the device on a stable and level surface.
Personnel:
■
Trained user
Rev.: 19 / 02.2025
Chapter 3.1 'Technical data'
AB4701en