Fastening The Transport Lock - Hettich Rotina 420 R Mode D'emploi

Storage conditions
4.2

Fastening the transport lock

AB4701en
■
When transporting using a transport aid (e.g., a pallet truck), the trans-
port aid must be able to carry at least 1.6 times the transport weight of
the device.
■
Secure the device to prevent it tipping over and falling down during
transport.
■
Never transport the device sideways or upside down.
■
The device must be stored in the original packaging.
■
Only store the device in dry rooms.
■
The storage temperature must be between -20 °C and +60 °C.
■
Humidity must not be condensing. Humidity must be between 10% and
80%.
Personnel:
■
Trained user
5
1
4
2
4
5
Fig. 20: Transport lock
1 Screws
2 Motor cover
3 *Bellows (only for centrifuges with cooling)
4 Transport lock
5 Transport lock screws
6 Spacer sleeve
1. Open the lid.
2. Unscrew the motor cover (
3. For ROTINA 420 R:
Remove the bellows (
4. Insert 3 transport locks (
on using the 3 transport lock screws (
5. Turn over the motor cover (
6. Screw in 4 screws (
7. For ROTINA 420 R:
3 ) over the edge of the engine cover (2).
Put the bellows (
Rev.: 19 / 02.2025
Transport and storage
1
3
4
2 ).
3 ).
4 ) and 3 spacer sleeves ( 6 ) and screw them
5 )
2 ) and insert it.
1 ).
1
2
21 / 64