Operator's Responsibility; Personnel Training; Safety Instructions - Hettich Rotina 420 R Mode D'emploi

Safety
2.3

Operator's responsibility

Provide information

Personnel training

2.4

Safety instructions

8 / 64
Follow the instructions in this document for proper and safe
use of the device.
Keep the user manual for future reference.
■
Following the instructions in this document will help:
–
To avoid dangerous situations.
–
To minimise repair costs and downtime.
–
To increase the reliability and service life of the device.
■
The operator is responsible for compliance with company regulations,
standards and national laws.
■
Note and keep the revision of the document separate from the docu-
ment. If lost, the document can be replaced in the correct revision.
■
Keep the user manual available at the place where the device is used.
■
Pass the user manual on to the buyer when the device is sold.
Lack of knowledge when working with the device may result in serious
injury or death.
■
Instruct personnel on their tasks and the associated risks in accordance
with the instruction.
Reporting of events and incidents
In the event of incidents or notifiable events involving the
device or its accessories, these must be reported to the
manufacturer and, where applicable, to the competent
authority where the user and/or the patient is registered.
Manufacturer:
Andreas Hettich GmbH
Föhrenstrasse 12
78532 Tuttlingen, Germany
Phone: +49 7461 705 0
E-mail: info@hettichlab.com
DANGER
Risk of contamination
Inadequate cleaning or failure to observe the cleaning
instructions can lead to contamination risks.
−
Observe national and local regulations on safety and
accident prevention.
−
Observe cleaning instructions.
−
Wear personal protective equipment when cleaning the
device.
−
Comply with laboratory regulations (e.g. TRBAs, the
German Protection against Infection Act, hygiene plan)
for handling biological agents.
Rev.: 19 / 02.2025 AB4701en