Commissioning; Unpacking The Centrifuge - Hettich Rotanta 460 R Mode D'emploi

Commissioning

5 Commissioning
5.1

Unpacking the centrifuge

24 / 73
5
1
4
2
4
Fig. 22: Transport lock ROTANTA 460 RF
1 Screws
2 Motor cover
3 Bellows
4 Transport lock
5 Screws for transport lock
1. Open the lid.
2. Unscrew the motor cover (
3. For ROTANTA 460 R / RC / RF:
Remove the bellows (
4. 3 Screw on the transport locks (
5 ).
lock (
5. Turn over the motor cover (
6. Screw in 4 screws (
7. For ROTANTA 460 R / RC / RF:
3 ) over the edge of the engine cover ( 2 ).
Put the bellows (
CAUTION
Danger of crushing due to parts falling out of the transport
packaging.
−
Keep the device balanced during the unpacking
process.
−
Only open the packaging at the points provided for this
purpose.
Rev.: 24 / 01.2024
1
3
4
2 ).
3 ).
4 ) using the 3 screws of the transport
2 ) and insert it.
1 ).
1
2
AB5650en