Lid With Screw Cap; Lid With Spring-Type Lock; Packing Instructions, Hettliner - Hettich Rotanta 460 R Mode D'emploi

Operation
Opening
6.6.4

Lid with screw cap

Fig. 31: Biosafety system
1 Lid
2 Bucket
Closing
Opening
6.6.5

Lid with spring-type lock

Fig. 32: Biosafety system
Closing
Opening
6.7

Packing instructions, HettLiner

Packing before centrifugation
38 / 73
4. For transport or when inserting and removing the bucket, swing the
bucket into the carrying position (
bracket.
�� The tightness of the biosafety system is also guaranteed in the
carrying position.
Do not rock the biosafety system back and forth during transport,
otherwise leak-tightness is no longer ensured.
1. Swivel the bracket to the "open" position (
The arrows of the labelling must point downwards so that the word
"open" is legible.
2. Remove the lid from the bucket.
1
2
1. Place the lid (
2. Turn the lid (
1. Turn the lid (
2. Remove the lid (
1. Put on the lid.
2. Fold down both clamping brackets until they are under the lugs of the
bucket.
1. Fold up both clamping brackets until they are above the lugs of the
bucket.
2. Remove the lid from the rotor.
Ensure that the plastic insert cannot tip over when loading
and unloading the inserts (if necessary, use loading aid
4509).
Rev.: 24 / 01.2024
4 ) and hold the bucket by the
1 ) centrally on the bucket ( 2 ).
1 ) clockwise until it is tightly closed.
1 ) anticlockwise until it is open.
1 ) from the bucket ( 2 ).
1 ).
AB5650en