Hettich ROTANTA 460 R Mode D'emploi page 136

Software operation
Procedure if the PIN is lost
58 / 73
[Rotary knob] to set the valid PIN.
4. Use the
If you are setting the PIN for the first time, skip this step or set
Input help: Press and hold down the relevant button.
[Ramp-up and ramp-down
parameters] button
[RCF] button
[RPM] button
[START] button.
5. Press the
'new PIN = ---- <START>' is displayed.
��
If an incorrect PIN was set,
again. In this case, set the valid PIN with the
[START] button.
press the
[Rotary knob] to set the new PIN.
6. Use the
'0000' must be set in order to disable the PIN.
7. Press the [START] button.
�� The setting is stored.
'Store PIN ...' is displayed briefly.
'-> Change PIN' is then displayed.
8. Press the [STOP/OPEN] button once to exit the 'Settings menu'
or
[STOP/OPEN] button twice to exit the 'Machine Menu' .
Press the
What is known as a Help number can be retrieved if the PIN is lost. The
manufacturer can use this number to calculate a PIN that replaces the
previously valid PIN.
[PROG] button for 8 seconds.
1. Hold down the
'***Machine Menu***' is displayed after 8 seconds.
2. Press the [PROG] button until '-> Change PIN' is displayed.
[START] button.
3. Press the
'old PIN = ---- <START>' is displayed.
��
[PROG] button.
4. Press the
'Get HELP # no' is displayed.
��
The previous PIN becomes invalid after retrieving the Help number.
[Rotary knob] to set 'yes' .
5. Use
[START] button.
6. Press the
'Are you sure ? no' is displayed.
��
[Rotary knob] to set 'yes' .
7. Use
[START] button.
8. Press the
'HELP # = 5487' is displayed.
��
Note down this Help number and use it to request the required
PIN. Setting a new PIN using the PIN received
Rev.: 24 / 01.2024
only the thousands digit of the
PIN is changed.
only the hundreds digit of the
PIN is changed.
only the tens digit of the PIN is
changed.
'old PIN = ---- <START>' is displayed
[Rotary knob] and
'0000' .
AB5650en